Delete a scope

You can delete a scope, for example, if you want an asset type to use the default assignment.

When you delete a scope, the asset types that used this scope, revert to other custom scopes or, if there are no other custom scopes, to the default assignment.

By default, you see the enhanced Scope page. However, your Collibra environment may still have the basic Scope page enabled. Contact Collibra support for more information.

You can read this procedure for both versions:

Prerequisites

Steps

  1. Open the Scopes page.
    1. On the main menu, click , and then click Settings.
      The Collibra settings page opens.

    2. In the Operating model section, click Scopes.
      The Scopes page opens.

  2. In the scope's tile, click .
    The Delete <scope name> dialog box appears.
  3. Click Delete.
  1. Open the Scopes page.
    1. On the main menu, click , and then click Settings.
      The Collibra settings page opens.

    2. In the Operating model section, click Scopes.
      The Scopes page opens.

  2. Click in the row of the scope to delete.
    The Delete <scope name> dialog box appears.
  3. Click Yes.