Create a logic condition for a question or page

There are two ways to create logic conditions in your template.

Note Any logic that you configure via the Template Designer tab appears in the Template Logic tab, and vice versa, with the exception of page-related logic conditions, which can only be configured via the Template Designer tab and do not appear in the Template Logic tab.

Prerequisites

You have a global role that has the Assessments global permission.

Via the Template Designer tab

  1. Go to the template gallery and open a template.
  2. Click the question or page tab for which you want to create a logic condition.
  3. In the Properties, expand the Logic settings.
  4. Expand the settings for the relevant logic option:
    1. Visible if
    2. Enable if
    3. Required if

  5. In the Select question... field, select the question to which the user's response can trigger the action.

    Note The questions are ordered alphabetically, not in the order of which they appear in the template.

  6. Click equals, and then select a logical operator.

    Note Not all logical operators are applicable to all question types.

  7. Enter or select a value.

Via the Template Logic tab

Note You can only create page-related logic conditions via the Template Design tab.

  1. Go to the template gallery and open a template.
  2. Click the Template Logic tab.
    A list of all logic conditions configured for the template is shown.
  3. Specify the conditions:
    1. Click Add New.

    2. In the Select question... field, select the question to which the user's response can trigger the action.

      Note The questions are ordered alphabetically, not in the order of which they appear in the template.

    3. Click equals, and then select a logical operator.

      Note Not all logical operators are applicable to all question types.

    4. Enter or select a value.
  4. Specify the action that occurs if the conditions are met:
    1. In the Select an action to add... drop-down list, select an action type.
    2. In the Select question... drop-down list, select the question that will be affected if the conditions are met.
  5. Do one of the following:
    • Click Save and return, to save the configurations and return to the list of logic conditions.
    • Click Save, to save your configurations.
    • Click Return without saving, to discard your configurations and return to the list of logic conditions.