Logic settings on the Template Designer tab

Important 

Choose an option below to explore the documentation for the latest user interface (UI) or the classic UI.

The following table describes the template settings shown in the Logic section in the sidebar on the Template Designer tab.

Number

 Setting Description

1

Visible If

 
  • If the defined conditions are met, the field is shown in the assessment.
  • If the defined conditions aren't met, the field isn't shown in the assessment.

Note This logic condition takes priority over the Visible template setting.
Editable If

 
  • If the defined conditions are met, the field is enabled in the assessment and users can enter a response in the field.
  • If the defined conditions aren't met, the field is disabled in the assessment and users can't enter a response in the field.
Required If

 
  • If the defined conditions are met, the field is mandatory and is identified by an asterisk (*) in the assessment. Users need to enter a response in the field before they can complete or submit the assessment.
  • If the defined conditions aren't met, the field is optional in the assessment. Users can complete or submit the assessment without entering a response in the field.

Note This logic condition takes priority over the Required template setting.

2

 Select... Field that determines whether or not the action (visible, editable, required) will happen.

3

 Equals / All of

Logical operator. All or some of the following, based on the type of the selected field:

  • Empty
  • Not empty
  • Equals (default, depending on the field type)
  • Does not equal
  • Any of
  • All of (default, depending on the field type)

4

 Value Response in the field that determines whether or not the action will happen.